Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Adjust building designs
Adjust desings for engineering
Adjust engineering designs
Adjust manufacturing designs
Adjust tightness of pump components
Adjusting tightness of pump components
Adjustment of tightness of pump components
Adjustment of tightness of pump parts
Adjustment to remuneration
Apply support for spinal adjustment
Apply supports for spinal adjustment
Apply supports for spinal adjustments
Fixing of pay
Furrow width adjuster
Hydraulic width adjustment
Narrow gingival width
Use supports for spinal adjustments
Wage adjustment
Wage determination
Wage fixing
Wage rate
Width adjustment
Width of wound
Working width adjustment

Vertaling van "Width adjustment " (Engels → Nederlands) :

TERMINOLOGIE
width adjustment | working width adjustment

breedteafstelling | breedteregeling




hydraulic width adjustment

hydraulische breedteverstelling


adjust building designs | adjust manufacturing designs | adjust desings for engineering | adjust engineering designs

technische ontwerpen aanpassen


adjusting tightness of pump components | adjustment of tightness of pump parts | adjust tightness of pump components | adjustment of tightness of pump components

spanning van pomponderdelen aanpassen


apply support for spinal adjustment | apply supports for spinal adjustments | apply supports for spinal adjustment | use supports for spinal adjustments

ondersteuningsmiddelen aanbrengen voor de correctie van de ruggengraat






A rare benign nail tumor originating in the nail matrix characterized by localized or diffuse thickening of the nail plate, increased transverse or longitudinal overcurvature, a yellow longitudinal band of variable width, swelling of the proximal nai

onychomatricoom


wage determination [ adjustment to remuneration | fixing of pay | wage adjustment | wage fixing | wage rate ]

vaststelling van het loon [ aanpassing van de lonen | aanpassing van de salarissen | aanpassing van de vergoedingen | loonvoet ]
IN-CONTEXT TRANSLATIONS
The support leg test device shall be adjusted in length and width to assess the vehicle floor contact surface, as defined in paragraph 5.2.5.2 (see also Figures 1 and 2 of Annex 10 to this Regulation).

De steunpoottestopstelling wordt in de lengte en breedte aangepast om het in punt 5.2.5.2 bepaalde contactoppervlak op de vloer van het voertuig (zie ook de figuren 1 en 2 van bijlage 10) te evalueren.


fixed or adjustable minimum track width of less than 1 150 mm for the axles fitted with the widest tyres; since the axle fitted with the widest tyres is assumed to be adjusted to a maximum track width of 1 150 mm, the other axle must be capable of being adjusted in such a way that the outer edges of the narrowest tyres do not project beyond the outer edges of the tyres on the axle with the widest tyres; where both axles are equipped with wheels and tyres of the same size, the fixed or adjustable track width of both axles must be les ...[+++]

instelbare of vaste minimumspoorbreedte van minder dan 1 150 mm bij de as die met bredere banden is uitgerust; wanneer de as met de breedste banden wordt verondersteld op een maximumspoorbreedte van 1 150 mm te zijn ingesteld, moet de spoorbreedte van de andere as zodanig kunnen worden ingesteld dat de buitenranden van de smalste banden niet verder reiken dan de buitenranden van de banden op de andere as; indien beide assen met velgen en banden van dezelfde afmetingen zijn uitgerust, moet de vaste of instelbare spoorbreedte van beide assen minder dan 1 150 mm bedragen;


fixed or adjustable minimum track width of less than 1 150 mm for the axles fitted with the widest tyres; since the axle fitted with the widest tyres is assumed to be adjusted to a maximum track width of 1 150 mm, the other axle must be capable of being adjusted in such a way that the outer edges of the narrowest tyres do not project beyond the outer edges of the tyres on the axle with the widest tyres; where both axles are equipped with wheels and tyres of the same size, the fixed or adjustable track width of both axles must be les ...[+++]

instelbare of vaste minimumspoorbreedte van minder dan 1 150 mm bij de as die met bredere banden is uitgerust; wanneer de as met de breedste banden wordt verondersteld op een maximumspoorbreedte van 1 150 mm te zijn ingesteld, moet de spoorbreedte van de andere as zodanig kunnen worden ingesteld dat de buitenranden van de smalste banden niet verder reiken dan de buitenranden van de banden op de andere as; indien beide assen met velgen en banden van dezelfde afmetingen zijn uitgerust, moet de vaste of instelbare spoorbreedte van beide assen minder dan 1 150 mm bedragen;


fixed or adjustable minimum track width with one of the axles less than 1 150 mm fitted with tyres of a larger size. It is assumed that the axle mounted with the wider tyres is set at a track width of not more than 1 150 mm. It must be possible to set the track width of the other axle in such a way that the outer edges of the narrower tyres do not go beyond the outer edges of the tyres of the other axle; where the two axles are fitted with rims and tyres of the same size, the fixed or adjustable track width of the two axles must be l ...[+++]

vaste of instelbare minimum spoorbreedte van de as met de grootste banden van minder dan 1 150 mm; de as met de breedste banden wordt geacht te zijn ingesteld op een spoorbreedte die maximaal 1 150 mm bedraagt; de andere as moet dan zo kunnen worden ingesteld dat de buitenranden van de smalste banden niet verder reiken dan de buitenranden van de banden van de andere as; zijn de assen voorzien van velgen en banden van dezelfde maat dan moet de vaste of instelbare spoorbreedte van beide assen minder dan 1 150 mm bedragen;


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
fixed or adjustable minimum track width with one of the axles less than 1 150 mm fitted with tyres of a larger size. It is assumed that the axle mounted with the wider tyres is set at a track width of not more than 1 150 mm. It must be possible to set the track width of the other axle in such a way that the outer edges of the narrower tyres do not go beyond the outer edges of the tyres of the other axle; where the two axles are fitted with rims and tyres of the same size, the fixed or adjustable track width of the two axles must be l ...[+++]

vaste of instelbare minimum spoorbreedte van de as met de grootste banden van minder dan 1 150 mm; de as met de breedste banden wordt geacht te zijn ingesteld op een spoorbreedte die maximaal 1 150 mm bedraagt; de andere as moet dan zo kunnen worden ingesteld dat de buitenranden van de smalste banden niet verder reiken dan de buitenranden van de banden van de andere as; zijn de assen voorzien van velgen en banden van dezelfde maat dan moet de vaste of instelbare spoorbreedte van beide assen minder dan 1 150 mm bedragen;


Note: If thickness or width of the gels are changed, the values for current and power have to be suitably adjusted (e.g. double the values for electric current and power if a 265 × 125 × 0,5 mm gel is used).

NB: Als de dikte of de breedte van de gels wordt veranderd, moeten de waarden voor de stroomsterkte en het vermogen dienovereenkomstig worden aangepast (bv. een verdubbeling van stroomsterkte en vermogen als een gel van 265 × 125 × 0,5 mm wordt gebruikt).


If thickness or width of the gels are changed, the values for current and power have to be suitably adjusted (e.g. double the values for electric current and power if a 265 x 125 x 0,5 mm gel is used).

Indien de dikte of de breedte van de gels wordt veranderd, dienen de waarden voor de stroomsterkte en het vermogen te worden aangepast (bv. tweemaal zo hoge waarden voor de stroomsterkte en voor het vermogen bij gebruik van een gel van 265 x 125 x 0,5 mm).


The conditions for obtaining NMR spectra are as follows:- a constant probe temperature (e.g. 302 K); - acquisition time of at least 6,8 s for 1 200 Hz spectral width (16K memory) (i.e. about 20 ppm at 61,4 MHz or 27 ppm at 46,1 MHz); - 90° pulse; - adjustment of acquisition time: its value must be of the same order as the dwell time; - parabolic detection: fix the offset 01 between the OD and CHD reference signals for ethanol and between the HOD and TMU reference signals for water; - determine the value of the decoupling offset 02 fro ...[+++]

De meetomstandigheden van de NMR-spectra zijn de volgende:- De temperatuur van de cel (bij voorbeeld 302 K) moet constant zijn.- Meettijd: ten minste 6,8 s bij 1200 Hz voor een volledig spectrum (geheugenruimte 16 K), dat wil zeggen ongeveer 20 ppm bij 61,4 MHz of ongeveer 27 ppm bij 46,1 MHz.- Blokpuls: 90°.- Uittriltijd: deze dient van dezelfde orde van grootte te zijn als de monstertijd (dwell time).- Tweedimensionale detectie: stel de ""offset" 01 in tussen de referentiesignalen OD en CHD voor ethanol en tussen de referentiesignalen van HOD en TMU voor water.- Bepaal de offset-waarde voor ontkoppeling 02 uitgaande van het protonspect ...[+++]


'- fixed or adjustable minimum track width of less than 1 150 mm for the axles fitted with the widest tyres; since the axle fitted with the widest tyres is assumed to be adjusted to a maximum track width of 1 150 mm, the other axle must be capable of being adjusted in such a way that the outer edges of the narrowest tyres do not project beyond the outer edges of the tyres on the axle with the widest tyres.

"- instelbare of vaste minimumspoorbreedte van minder dan 1 150 mm bij de as die met bredere banden is uitgerust; wanneer de as met de breedste banden wordt verondersteld op een maximumspoorbreedte van 1 150 mm te zijn ingesteld, moet de spoorbreedte van de andere as zodanig kunnen worden ingesteld dat de buitenranden van de smalste banden niet verder reiken dan de buitenranden van de banden op de andere as.


w