Systems with Constant Mass Flow For systems with heat exchanger, the mass of the pollutants MGAS (g/test) shall be determined from the following equation: MGAS = u x con
c x MTOTW where u = ratio between density of the exhaust component and density of diluted exhaust gas, as reported in Table 4, point 2.1.2.1 conc = average background corrected concentrations over the cycle from integration (mandatory for NOx and HC) or bag measur
ement (ppm) MTOTW = total mass of diluted exhaust gas over the cycle as determined in section 2.2.1 (kg)
As the NOx ...[+++] emission depends on ambient air conditions, the NOx concentration shall be corrected for ambient air humidity with the factor k H , as described in section 2.2.2.Systemen met een constante massastroom Bij systemen met een warmtewisselaar moet de massa van de verontreinigingen MGAS (g/test) met behulp van de volgende formule worden bepaald: MGAS = u x conc x MTOTW waarin: u = verhouding tussen de dichtheid van de uitlaatgascomponent en de dichtheid van verdund uitlaatgas, volgens tabel 4, punt 2.1.2.1 conc = gemiddelde voor de achtergrond gecorrigeerde concentraties gedurende de cyclus, verkregen uit integratie (verplicht voor NOx en HC) of uit zakmeti
ng (ppm); M TOTW = totale massa van het verdunde uitlaatgas over de gehele cyclus, zoals bepaald in punt 2.2.1 (kg). Aangezien de NOx-emissie afhan
...[+++]kelijk is van de toestand van de omgevingslucht, moet de NOx-concentratie worden gecorrigeerd voor de omgevingsluchtvochtigheid met behulp van de factor K H , zoals beschreven in punt 2.2.2.