Vertaling van "use painting equipment " (Engels → Nederlands) :

TERMINOLOGIE

use safely painting equipment | utilise painting appliances | apply painting equipment | use painting equipment
verfgereedschap gebruiken

clean painting apparatus | clean painting devices | clean paint equipment | clean painting equipment
verfbenodigdheden reinigen | verfbenodigdheden schoonmaken

handle paint safety equipment | operate paint safety equipment | paint safety equipment use | use paint safety equipment
veiligheidsuitrusting voor verf gebruiken

waste from the MFSU of paint and varnish | wastes from manufacture, formulation, supply and use and removal of paint and varnish | wastes from MFSU and removal of paint and varnish
afval van bereiding,formulering,levering en gebruik van verf en lak

Standing Committee on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres | Standing Committee on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres (EXAT)
Permanent Comité voor de onderlinge aanpassing van de wetgevingen van de lidstaten betreffende apparaten en beveiligingssystemen bedoeld voor gebruik op plaatsen waar ontploffingsgevaar kan heersen (ATEX)

Wastes from the manufacture, formulation, supply and use (MFSU) of coatings, (paints, varnishes and vitreous enamels), adhesive, sealants and printing inks
Afval van bereiding, formulering, levering en gebruik van coatings (verf, lak en email), kit en drukinkt

electronic waste [ electrical waste | used battery | waste electrical and electronic equipment ]
elektronisch afval [ lege batterijen ]

IN-CONTEXT TRANSLATIONS

The use of cleaning equipment and appropriate waste management (in order to limit water and soil pollution). For example, text advising that unused paint requires specialist handling for safe environmental disposal and therefore it should not be thrown away with household or commercial waste (e.g. ‘Do not put residual paint down the kitchen sink or toilet, or into a waste bin’).
aanbevelingen voor het reinigen van gereedschappen en adequaat afvalbeheer (teneinde water- en bodemverontreiniging zo veel mogelijk te beperken), zoals de vermelding dat ongebruikte verf een specifieke behandeling vereist met het oog op milieuvriendelijke verwijdering, en daarom niet mag worden weggegooid met het huishoudelijk of bedrijfsafval (bv. „Giet verfresten niet weg in de gootsteen of in het toilet of werp ze niet in een vuilnisbak”).

- they do not have access to the same equipment (especially engineering controls) as users involved in industrial uses - and in some cases, the working conditions at home may be much worse than those for tradesmen (for example, paint stripping may be undertaken in a basement, or an enclosed area with closed windows, due to bad weather, or in the presence of vulnerable persons such as children, elderly relatives or those with health conditions); and
- zij hebben geen toegang tot uitrusting (met name technische veiligheidsmaatregelen) als gebruikers in de industrie en in een aantal gevallen kunnen de werkomstandigheden thuis veel slechter zijn dan die voor vakmensen (het afbijten van verf gebeurt bijvoorbeeld in een kelder of een afgesloten ruimte met, wegens slecht weer, gesloten ramen of in de aanwezigheid van kwetsbare personen zoals kinderen, ouderen of mensen die in slechte gezondheid verkeren); en

Certain provisions on classification and labelling laid down in Directives 67/548/EEC and 1999/45/EC also serve for the purpose of application of other Community legislation, such as Council Directive 76/768/EEC of 27 July 1976 on the approximation of the laws of the Member States relating to cosmetic products , Council Directive 88/378/EEC of 3 May 1988 on the approximation of laws of the Member States concerning the safety of toys , Council Directive 1999/13/EC of 11 March 1999 on the limitation of emissions of volatile organic compounds due to the use of organic solvents in certain activities and installations , Directive 2000/53/EC of the European Parliament and of the Council of 18 September 2000 on end-of-life vehicles , Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE) and Directive 2004/42/EC of the European Parliament and of the Council of 21 April 2004 on the limitation of emissions of volatile organic compounds due to the use of organic solvents in certain paints and varnishes and vehicle refinishing products
Een aantal bepalingen betreffende indeling en etikettering in de Richtlijnen 67/548/EEG en 1999/45/EG wordt ook gebruikt voor de toepassing van andere communautaire wetgeving, zoals Richtlijn 76/768/EEG van de Raad van 27 juli 1976 betreffende de onderlinge aanpassing van de wetgevingen der lidstaten inzake cosmetische producten , Richtlijn 88/378/EEG van de Raad van 3 mei 1988 betreffende de onderlinge aanpassing van de wetgevingen van de lidstaten inzake de veiligheid van speelgoed , Richtlijn 1999/13/EG van de Raad van 11 maart 1999 inzake de beperking van de emissie van vluchtige organische stoffen ten gevolge van het gebruik van organische oplosmiddelen bij bepaalde werkzaamheden en in installaties , Richtlijn 2000/53/EG van het Europees Parlement en de Raad van 18 september 2000 betreffende autowrakken , Richtlijn 2002/96/EG van het Europees Parlement en de Raad van 27 januari 2003 betreffende afgedankte elektrische en elektronische apparatuur (AEEA) en Richtlijn 2004/42/EG van het Europees Parlement en de Raad van 21 april 2004 inzake de beperking van emissies van vluchtige organische stoffen ten gevolge van het gebruik van organische oplosmiddelen in bepaalde verven en vernissen en producten voor het overspuiten van voertuigen

(6) For other paints than spray paints, a warning against using such paints in spraying equipment should be required where those paints contain a DEGBE concentration limit which is equal to or more than 3%.
(6) Voor andere verfsoorten dan spuitverven moet er een waarschuwing komen dat verf met een DEGBE-concentratie van meer dan 3% niet in spuitverfapparatuur mag worden gebruikt.

(6) For other than spray paints or spray cleaners, a warning against using such paints or cleaners in spraying equipment should be required where those paints or cleaners contain DEGBE in a concentration which is equal to or more than 3%.
(6) Voor andere soorten verf en reinigingsmiddelen dan die welke worden gespoten moet er een waarschuwing komen dat verf en reinigingsmiddelen met een DEGBE-concentratie van meer dan 3% niet in spuitverfapparatuur mogen worden gebruikt.

(3) Without prejudice to other Community legislation concerning the classification, packaging and labelling of dangerous substances and preparations, paints, detergents and cleaners other than sprays containing more than 3% by mass of DEGBE that are placed on the market for supply to the general public shall be legibly and indelibly marked by [24 months after the entry into force of the Decision] as follows:“Do not use in spraying equipment”.
(3) Onverminderd andere communautaire wetgeving betreffende de indeling, verpakking en etikettering van gevaarlijke stoffen en preparaten moet op andere verven, detergentia en reinigingsmiddelen dan sprays, die meer dan 3 massaprocent DEGBE bevatten en op de markt worden gebracht voor levering aan het grote publiek, uiterlijk op [24 maanden na de inwerkingtreding van deze beschikking] duidelijk leesbaar en onuitwisbaar de volgende vermelding worden aangebracht:"Niet gebruiken in

Annex 1: List of selected projects Annex 2: Examples of CRAFT projects Annex 1 INDUSTRIAL AND MATERIALS TECHNOLOGIES Brite-EuRam II 1990-1994 List of 23 CRAFT projects retained Nr of the proposal Title of the proposal, prime proposer and country CR-1197-91 The recycling of second-hand textile waste Prime proposer : TRICOOP SC (B) CR-1280-91 Automatic reuse of electronic components on printed circuit boards and separation of toxic components Prime proposer : Weld-Equip D.V (NL) CR-1283-91 Plasma coupling of microwave supplies in reactors for treatment of polymers and organic materials Prime proposer : Plassys (F) CR-1292-91 Non destructive testing and imaging of concrete Prime proposer : Pharma Test UK Ltd (UK) CR-1293-91 Development of a new heald-frame-system for high speed weaving machines Prime proposer : Schmeing GmbH Co (D) CR-1302-91 Microwave jigger providing dyeing and bleaching processes reducing time, energy and chemicals consumption Prime proposer : Lajtos S.A (F) CR-1304-91 Special reactive latent hardener for use in the wood-based panels industry Prime proposer : Marlit LTD (GR) CR-1306-91 Wood output optimization study of the sawing process using circular saws for curved wood along the EC Atlantic rim (curvsaw) Prime proposer : M.E.M (F) CR-1309-91 "A design support system for the design of plastic infection moulds" Prime proposer : Bogimac Engineering (B) CR-1323-91 Frylacop (Fry and Larvae Counting Program) Prime proposer : 3A (F) CR-1331-91 Paint manufacturing process optimization for the building industry, using bases and pigments formulation Prime proposer : Corob (I) CR-1350-91 Cutting tools performance improvement through application of ultrahard coatings in the field of furniture and building carpentry Prime proposer : Zubiola, S. Coop (B) CR-1375-91 Optimising the surface properties of footwear insocks Prime proposer : G.T. Hawkins Ltd (UK) CR-1381-91 Development of repair procedures and regulations for the repair of corroded aluminium, especi ...
Bijlage 1: Lijst van geselecteerde projecten Bijlage 2: Voorbeelden van CRAFT-projecten Annex 1 INDUSTRIAL AND MATERIALS TECHNOLOGIES Brite-EuRam II 1990-1994 List of 23 CRAFT projects retained Nr of the proposal Title of the proposal, prime proposer and country CR-1197-91 The recycling of second-hand textile waste Prime proposer : TRICOOP SC (B) CR-1280-91 Automatic reuse of electronic components on printed circuit boards and separation of toxic components Prime proposer : Weld-Equip D.V (NL) CR-1283-91 Plasma coupling of microwave supplies in reactors for treatment of polymers and organic materials Prime proposer : Plassys (F) CR-1292-91 Non destructive testing and imaging of concrete Prime proposer : Pharma Test UK Ltd (UK) CR-1293-91 Development of a new heald-frame-system for high speed weaving machines Prime proposer : Schmeing GmbH Co (D) CR-1302-91 Microwave jigger providing dyeing and bleaching processes reducing time, energy and chemicals consumption Prime proposer : Lajtos S.A (F) CR-1304-91 Special reactive latent hardener for use in the wood-based panels industry Prime proposer : Marlit LTD (GR) CR-1306-91 Wood output optimization study of the sawing process using circular saws for curved wood along the EC Atlantic rim (curvsaw) Prime proposer : M.E.M (F) CR-1309-91 "A design support system for the design of plastic infection moulds" Prime proposer : Bogimac Engineering (B) CR-1323-91 Frylacop (Fry and Larvae Counting Program) Prime proposer : 3A (F) CR-1331-91 Paint manufacturing process optimization for the building industry, using bases and pigments formulation Prime proposer : Corob (I) CR-1350-91 Cutting tools performance improvement through application of ultrahard coatings in the field of furniture and building carpentry Prime proposer : Zubiola, S. Coop (B) CR-1375-91 Optimising the surface properties of footwear insocks Prime proposer : G.T. Hawkins Ltd (UK) CR-1381-91 Development of repair procedures and regulations for the repair of corroded ...

1. Conservation and restoration of artefacts (including archaeological finds, paintings, sculptures, etc.) and monuments by joint teams from the Member States, with publication of results making good use of the know-how and technical equipment of each participant and comparing conservation and restoration criteria and methods.
1. Conservering en restauratie van kunstvoorwerpen (waaronder archeologica, schilderijen, beeldhouwwerken, enzovoort) en monumenten door gemengde teams van de lidstaten, en publicatie van de resultaten onder gebruikmaking van de knowhow en de technische uitrusting van alle deelnemers, alsook vergelijking van conserverings- en restauratiecriteria en -methoden.